power entry modules with line filter dc22 www.schurter.com/pg0 6 emc products iec appliance inlet c14 with filter, line switch 1- or 2-pole, pcb mounting standard- or medical-filter c14 70 c description - panel mount: screw-on mounting on pcb from rear-side - 3 functions: appliance inlet protection class i, line switch 1- or 2-pole, line filter in standard and medical version - for pcb mounting approvals - vde certificate number: 40001522 - ul file number: e72928 characteristics - ultra-compact design - all single elements are already wired - line switch non-illuminated or illuminated - with emc-shield - especially suitable for use in switching power supplies ideal for application with high transient loads - qualified for use in equipment according iec/en 60950 other versions on request - fixing on pcb with self-tapping screws 3 mm or pre-inserted nuts m3 - other rocker marking - illuminated green - medical version m80 - capacitance cx1 references alternative: version without line filter dc2 1 weblinks pd f , general product informatio n , approval s , roh s , china-roh s , mating connector s , e-stor e , schurter-stock-chec k , distributor- stock-chec k , accessorie s newly available variants corresponding to v-lock mating cordset. the connector is equipped with a notch intended for use with the latching cordset. the cord latching system prevents against accidental removal of the cordset. technical data ratings iec 1 - 10 a @ ta 40 c / 250 vac; 50 hz ratings ul/csa 1 - 10 a @ ta 40 c / 125 vac; 60 hz leakage current standard < 0.5 ma (250 v / 60 hz) medical < 5 a (250 v / 60 hz) dielectric strength > 1.7 kvdc between l-n > 2.7 kvdc between l/n-pe test voltage (2 sec) allowable operation temp. -25 c to 85 c climatic category 25/085/21 acc. to iec 60068-1 degree of protection from front side ip 40 acc. to iec 60529 protection class suitable for appliances with protection class 1 acc. to iec 61140 terminal for pcb mounting ; ground terminal: quick connect terminals 6.3 x 0.8 mm angled to pin axis panel thickness s screw: max 4 mm mounting screw torque max 0.5 nm material: housing thermoplastic, black, ul 94v-0 appliance-inlet/-outlet c14 acc. to iec/en 60320-1, ul 498 csa c22.2 no. 42 (for cold conditions) pin-temperature 70 c, 10 a, protection class 1 line switch rocker switch 1 or 2 pole, non-illumi - nated or illuminated red, acc. to iec 61058-1 technical detail s line filter standard and medical version, iec 60939, iec 60601-1, ul 1283, ul 544, en 133 200, csa c22.2 no. 8 technical detail s mtbf > 2'100'000 h acc. to mil-hb-217 f
2 power entry modules with line filter dc22 www.schurter.com/pg0 6 emc products dimensions 57.6 mm screw on pcb mounting 34 2.5 37.6 4.5 8.1 1.25 1) r 5.1 30 2.2 16.2 32.7 0.85 47.05 r 4 6.05 19.5 10.5 3.95 0.15 30.4 4.3 39 3.6 r4.2 34.4 39 46.8 n p e l 57.6 47.6 4.2 5.8 2.8 32.5 0.05 0.10 0.10 1) all pins 38 2) 28.4 41 6.6 r4.4 3.4 6.05 1.6 32.7 0.10 0.15 16.2 0.20 38 +0.10 0 0.20 3.6 1.6 +0.10 0 pe l n 2) pe additionally as quick-connect terminal 6.3 x 0.8 technical data of filter-components rated current [a] filter-type inductances l [mh] capacitance cx [nf] capacitance cy [nf] r [m ? ] 1 standard version 2 x 10 100 2.2 1 2 standard version 2 x 4 100 2.2 1 4 standard version 2 x 1.5 100 2.2 1 6 standard version 2 x 0.8 100 2.2 1 10 standard version 2 x 0.3 100 2.2 1 1 medical version (m5) 2 x 10 100 - 1 2 medical version (m5) 2 x 4 100 - 1 4 medical version (m5) 2 x 1.5 100 - 1 6 medical version (m5) 2 x 0.8 100 - 1 10 medical version (m5) 2 x 0.3 100 - 1
power entry modules with line filter dc22 www.schurter.com/pg0 6 emc products diagrams standard filter 1-pole 1) line 2) load standard filter 2-pole 1) line 2) load medical filter 1-pole (m5) 1) line 2) load medical filter 2-pole (m5) 1) line 2) load standard filter 2-pole illuminated 1) line 2) load medical filter 2-pole (m5) illuminated 1) line 2) load attenuation loss - - - - differential mode _____ common mode standard version 1 a 2 a 4 a 6 a 10 a medical version (m5) 1 a 2 a 4 a 6 a 10 a technical data of filter-components rated current [a] filter-type inductances l [mh] capacitance cx [nf] capacitance cy [nf] r [m ? ] 1 standard version 2 x 10 100 2.2 1 2 standard version 2 x 4 100 2.2 1 4 standard version 2 x 1.5 100 2.2 1 6 standard version 2 x 0.8 100 2.2 1 10 standard version 2 x 0.3 100 2.2 1 1 medical version (m5) 2 x 10 100 - 1 2 medical version (m5) 2 x 4 100 - 1 4 medical version (m5) 2 x 1.5 100 - 1 6 medical version (m5) 2 x 0.8 100 - 1 10 medical version (m5) 2 x 0.3 100 - 1
power entry modules with line filter dc22 www.schurter.com/pg0 6 emc products variants rated current [a] filter-type line switch illumination color order number 1 standard version 1-pole - dc22.1111.111 2 standard version 1-pole - dc22.2111.111 4 standard version 1-pole - dc22.4111.111 6 standard version 1-pole - dc22.6111.111 10 standard version 1-pole - dc22.9111.111 1 standard version 2-pole - dc22.1121.111 2 standard version 2-pole - dc22.2121.111 4 standard version 2-pole - dc22.4121.111 6 standard version 2-pole - dc22.6121.111 10 standard version 2-pole - dc22.9121.111 1 standard version 2-pole l red dc22.1123.111 2 standard version 2-pole l red dc22.2123.111 4 standard version 2-pole l red dc22.4123.111 6 standard version 2-pole l red dc22.6123.111 10 standard version 2-pole l red dc22.9123.111 1 medical version (m5) 2-pole - dc22.1221.111 2 medical version (m5) 2-pole - dc22.2221.111 4 medical version (m5) 2-pole - dc22.4221.111 6 medical version (m5) 2-pole - dc22.6221.111 10 medical version (m5) 2-pole - dc22.9221.111 1 medical version (m5) 2-pole l red dc22.1223.111 2 medical version (m5) 2-pole l red dc22.2223.111 4 medical version (m5) 2-pole l red dc22.4223.111 6 medical version (m5) 2-pole l red dc22.6223.111 10 medical version (m5) 2-pole l red dc22.9223.111 packaging unit 10 pcs accessorie s description cord retaining kit s cord retaining strain relief flat head, h 4700.0008 mating outlets/connector s category / description appliance outletoverview complet e iec appliance outlet f, screw-on mounting, front side, solder terminal 478 7 iec appliance outlet f, snap-in mounting, front side, solder or quick-connect terminal 478 8 iec appliance outlet f or h, screw-on mounting, front side, solder, pcb or quick-connect terminal 509 1 iec appliance outlet f or h, screw-on mounting, front side, solder or quick-connect terminal 509 2 appliance outletfurther types todc2 2
power entry modules with line filter dc22 www.schurter.com/pg0 6 emc products connectoroverview complet e iec connector c15, rewireable, straight 010 1 iec connector c15a, rewireable, straight 010 2 iec connector c15a, rewireable, straight 0102- g iec connector c15a, rewireable, angled 011 2 iec connector c13, rewireable, angled 401 2 connectorfurther types todc2 2 ... power cordoverview complet e power cord with iec connector c13, angled 031 1 power cord with iec connector c13, angled 301 1 power cord with iec connector c13, angled 301 2 power cord with iec connector c13, angled 301 3 power cord with iec connector c13 302 0 power cordfurther types todc2 2 ... the specifications, descriptions and illustrations indicated in this document are based on current information. all content is subject to modifications and amendments.
|